Types of Dental Bridge: Conventional, Cantilever and Resin-Bonded
Dental bridge types include conventional and cantilever bridges, and resin-bonded bridges, also called adhesive and sometimes Maryland bridges. An NHS trust leaflet says resin-bonded bridges need very little or no drilling, but can sometimes make the supporting tooth look slightly greyer. Bristol Dental School says they are usually advised to replace single teeth.
5.0 from 600+ Google reviews
Open 8am to 8pm, seven days
Free parking at the door
CQC & GDC registered
No referral needed

Clinically reviewed by Dr Ibraheem Ijaz, dentist · GDC 301711
Medical disclaimer: This page is for general information only. It does not replace an examination or treatment by a dentist.
Dr Ibraheem Ijaz, principal dentist at Deepcar Dental Care and a General Dental Practitioner (GDC 301711), reviewed this page.
How do the types of dental bridge differ?
Conventional, cantilever and resin-bonded bridges differ in which teeth hold the false tooth and how much those teeth are drilled.
Appointments, cleaning and lifespan are covered on our main page about replacing a tooth with a bridge. Bridges sit within restorative dentistry, which works to save natural teeth. A fixed bridge and a removable denture are compared on our page bridge or denture: which should I choose?.
What is a conventional bridge?
A conventional bridge holds the false tooth between two crowns, one on each tooth beside the gap, the Oral Health Foundation explains.
A Leeds Teaching Hospitals NHS Trust leaflet says each supporting tooth is drilled down to a peg for a crown, which can change how those teeth look to match the false tooth. Colour matching is explained in our guide to dental shade matching.
The Leeds leaflet adds that a conventional bridge can be destructive to the supporting teeth and can affect the nerve of the tooth.
What is a cantilever bridge?
A cantilever bridge has its supporting tooth or teeth at one end only, with the other end unsupported, Sharma and colleagues' 2012 narrative review explains.
That review notes that much debate about the design has lacked documentary evidence. It concludes that a cantilever is considered a compromise next to a bridge secured at both ends. A 2021 review of 29 clinical studies of metal-framed bridges, with over 5 years of results, treats crown-held cantilevers and one-wing resin-bonded bridges as separate designs. Its authors knew of no report comparing success or survival of resin-bonded and crown-held bridges in identical clinical situations (Mine and colleagues).
What is a resin-bonded bridge?
A resin-bonded bridge, which the Leeds leaflet calls an adhesive bridge, is held by a metal wing bonded to the back of a neighbouring tooth.
The leaflet says it is sometimes also known as a resin-retained or Maryland bridge.
To ask about dental bridges, book online or call 0114 288 2121.
How does tooth preparation compare between bridge types?
Tooth preparation ranges from drilling each supporting tooth down for a crown to very little or no drilling.
| Bridge type (general guidance) | What holds the false tooth | Drilling of the supporting tooth |
|---|---|---|
| Conventional | A crown on the tooth on each side of the gap | Drilled down to a peg for a crown |
| Cantilever, crown-held | One or more supporting teeth at one end; the other end is unsupported | Drilled down to a peg for a crown |
| Resin-bonded (adhesive or Maryland) | A small metal wing bonded to the back of a neighbouring tooth | Very little or no drilling |
Holding: Oral Health Foundation (conventional), Sharma and colleagues (cantilever), the Leeds leaflet (resin-bonded). Drilling: the Leeds leaflet, which describes crowning one supporting tooth or two.
A laboratory study on resin model front teeth (upper central incisor, upper canine, lower central incisor; 10 preparations per design) found veneer and grooved resin-bonded retainer preparations removed about 3 to 30% of the tooth's crown by weight, and crowns about 63 to 72%. Within its limitations, the authors put these preparations at about a quarter to a half of a crown's reduction (Edelhoff and Sorensen, 2002).
How does longevity compare between bridge types?
Reviews report each type's survival from different groups of studies, so the figures are not a head-to-head comparison.
- Conventional bridges: a 2004 systematic review of 19 cohort studies, with an average follow-up of at least 5 years and patients examined clinically, estimated 89.1% survival and 71.1% success after 10 years, and a 10-year risk of 6.4% of the bridge coming loose (Tan and colleagues).
- Crown-held cantilever bridges: a 2004 systematic review of 13 cohort studies with the same entry criteria estimated 81.8% survival, and 63% free of all complications, after 10 years, with coming loose the most frequent technical complication (16.1%). It indicated survival and success below those of the conventional bridges in Tan's review, and that biological and technical complications were frequent (Pjetursson and colleagues).
- Resin-bonded bridges: a 2017 systematic review of 29 cohort studies and case series, with 2,300 bridges, an average follow-up of at least 5 years and patients examined clinically, estimated 91.4% survival at 5 years and 82.9% at 10 years. De-bonding affected 15% over 5 years, and the authors concluded that technical complications such as de-bonding and minor chipping were frequent despite the high survival (Thoma and colleagues).
Which bridge type suits which case?
In general, sources link each type to particular cases.
Bristol Dental School says resin-bonded bridges are usually advised to replace single teeth, including teeth lost to dental disease or dental trauma and teeth that have not developed normally. The supporting tooth must be healthy enough to support the bridge tooth, it adds.
For front teeth, where biting forces are lighter, adhesive bridges are often used, the Oral Health Foundation says. In Thoma and colleagues' 2017 review, survival was higher for resin-bonded bridges at the front of the mouth than at the back, and bridges held by one retainer had significantly higher survival and less de-bonding than those held by two or more. A 2021 integrative review of 23 clinical studies, each with at least 3 years' follow-up, covering 1,746 front-tooth resin-bonded bridges and searching one database, found that failure rates did not differ significantly between one- and two-retainer designs, although estimated 5-year longevity was higher with one retainer (Mendes and colleagues).
A Leeds NHS trust leaflet says a conventional bridge can be more secure than an adhesive one and is usually advised if the supporting teeth are already crowned or have large fillings. Sharma and colleagues' review, which covers crown-held cantilevers, recommends at least two supporting teeth, although this may vary with the clinical situation and where the false tooth sits. The only documented exception it gives for one supporting tooth is a canine holding a replacement upper side incisor.
Which bridge types are offered at Deepcar Dental Care?
At Deepcar Dental Care, bridges are provided by our restorative dentists, and options include conventional bridges, adhesive and Maryland bridges, and cantilever bridges.
The realistic lifespan range for a bridge at the practice is 5 to 20 years. Outcomes depend on the individual patient, their oral hygiene and their habits.
Bridges have 12 months of aftercare cover, which gives free repair, free replacement or remake, and free adjustments. The cover does not apply where damage results from accidental trauma or infection.
A bridge takes 2 to 3 visits.
Frequently asked questions
Is a resin-bonded bridge reversible?
Bristol Dental School describes resin-bonded bridges as a reversible treatment option. If the bridge falls out, the school says, it does not damage the underlying tooth structure. It lists them as minimally invasive, because most do not require drilling of natural teeth, which preserves tooth tissue.
Does a conventional bridge affect the nerve of the supporting tooth?
It can, a Leeds NHS trust leaflet says. In a small percentage of cases, up to 10 to 15%, the nerve of a conventional bridge's supporting tooth is irreversibly damaged and the tooth may get infected. That tooth may then need root canal treatment.
What should you do if a resin-bonded bridge comes off?
Keep the bridge so that it can be reviewed, Bristol Dental School advises, noting that some resin-bonded bridges may de-bond. A Leeds NHS trust leaflet says the most common complication with adhesive bridges is failure of the cement holding the bridge in place, so the bridge may fall off.
Can a bridge replace more than one missing tooth?
Yes: the Oral Health Foundation describes a dental bridge as replacing one or more missing teeth. Bristol Dental School adds that resin-bonded bridges can often only replace one tooth, and that if multiple teeth are missing, a resin-bonded bridge may not be suitable.
Will a resin-bonded bridge show when you smile?
The metal wing is hidden by attaching it to the natural tooth, Bristol Dental School says. The school adds that the wing sits on the back of the tooth or sometimes its biting surface. A Leeds NHS trust leaflet notes an adhesive bridge can sometimes make the supporting tooth look slightly greyer.
Book a consultation.
Online in under a minute, or call and speak to a real person.
Deepcar Dental Care is at 334 Manchester Road, Deepcar, Sheffield, S36 2RH. The practice is open 8am to 8pm, Monday to Sunday. Patient feedback is on the practice's reviews page.
334 Manchester Road
Deepcar, Sheffield S36 2RH
0114 288 2121
Contact us
Opening hours
Open 8am to 8pm, seven days
Free parking at the door